MicroMobile®
MXTA10 3dB Gain Antenna
3db gain antenna that doubles signal output. 462 MHz base loaded 5/8 wave antenna. Complete with load coil, chrome collinear rod and NMO connector. Requires antenna mount. *Antenna mount not included.
$29.99
Features
Specific Frequency: 462 MHz
Gain: 3dB
12 inches in length
1.5 inch base diameter
Mobile Antenna Mounting Type: NMO
Whip Material: Stainless Steel
VIEW MORE
What's in the box
- 3dB Gain Antenna
Product Support
REVIEWS
3dB Gain Antenna is rated
out of
5 by
3.
Rated 5 out of
5
by
MXT115 from
Improved Performance and Low Profile
This 3db antenna offers excellent results and a low profile, even with a magnet mount. It was an ideal antenna solution for my SUV.
Date published: 2018-09-08
Rated 5 out of
5
by
Techman from
Good antenna
Bought this to give signal a bit more punch when the trees start to bloom but still maintain a low profile with mag mount. Works for me about 20 miles no problem.
Date published: 2018-07-05
Rated 5 out of
5
by
Reloader Fred from
Worked Great!
I bought this to extend the range of my MXT275 radio and it worked just great. The reception was loud and clear.
Date published: 2018-08-17
QUESTIONS
Is the entire length of the product (including base) 12 inches or just the antenna part? Thinking about garage door clearance. Thanks!
Hey Simon, That would be including the base!
Date published: 2018-08-20
Do these antennas require a ground plane?
Yes, the MXTA9, MXTA10, and MXTA11 are ground plane type antennas.
Date published: 2018-07-18
What kind of SWR should i expect from this antenna?
Anything between 1.5 and 2.5 is acceptable.
Date published: 2018-06-25
The description specifically mentions 462 MHz. But does this antenna work with the 467 MHz repeater frequencies?
Hello Adam!
Antennas are tuned to a center frequency, but have a range of frequencies they will work for; this antenna (as well as our 6db gain antenna) will work just fine across all GMRS frequencies.
Date published: 2018-05-14
Will this antenna attach to the magnet base that comes with the MXT90?
Hello Dan, unfortunately the 3db gain will not fit on the antenna base from the MXT90. You will need MXTA12!
Date published: 2018-04-15
Can this antenna be used with the mxt105?
