You're almost there! Add $250.00 to your cart for free shipping.
Midland Radio is leveling up communication with the help of its powerful MicroMobile® two-way radios.
In order to push communication further and make communication easier, Midland Radio's MicroMobile® accessories are the perfect addition to your comms setup.
Whether you're an off-roader, farmer, RV'er, fisher, hunter, etc. shop a few of Midland's favorite MicroMobile® accessories before your next outdoor adventure.
Avoid a crowded dashboard and permanent installation of your MXT115 or MXT275 with the help of Ram Mounts.
The tough wedge easily slides in between a seat cushion and the console of your vehicle.
The air pump allows for a tight fit and you can adjust it to fit your vehicle.
Perfect for off-roading in loud or open-air vehicles, the MXMC01 will effectively remove background noise from the engine or wind. With this feature, users will be able to transmit with authority and ensure no message is lost with those around them.
The MXMC01 also has a large LCD display that will make controlling the microphone that much easier.
Also, the MXMC01 has a power knob that will ensure if you turn your vehicle off, your MicroMobile will automatically power back on when your car is restarted.
Make MicroMobile communication as easy as possible with the help of the MXMCBK.
Grab your microphone and release it once you've transmitted a message to keep the mic out of the way.
Midland's tether is made from high quality kevlar and allows MicroMobile users to mount the microphone outside of the field of vision.
The tether is especially useful for farmers and off-roaders.
Antenna placement is key to expanding your GMRS two-way radio range.
One of Midland's universal antenna mounts is the MXTA23.
It attached to roll bars, roof racks, and mirrors.
The mount includes bolts and is built to help with an easy installation.
This fiberglass antenna will more than quadruple your signal output to bring unprecedented communication to any adventure.
The antenna is 50 inches tall and is easily installed with a 1/2 inch hole for mounting.
>
