You're almost there! Add $250.00 to your cart for free shipping.
Mounting made easy.
Midland's new bull bar antenna mounts are now available!
Learn more about the antenna mounts that'll save you time and make stretching two-way radio range that much easier.
Midland’s U Bolt Bracket Bull Bar Antenna Mounting Bracketmakes for a seamless,drill-free installationthat’ll support your bull bar antenna for heavy-duty performance.
Features
Who uses the MXATMT1
Agriculture:
Save installation time on the farm with Midland's user-friendly U Bolt Bracket Bull Antenna Mounting Bracket, expanding two-way radio range across the property.
Off-road/Overland:
Off-roaders and overlanders can bring heavy-duty performance to the trails with Midland's U Bolt Bracket Bull Bar Antenna Mounting Bracket, offering a drill free and intuitive set up.
Midland's new folding bull bar antenna mount makes it easier than ever to bring heavy-duty performance to GMRS two-way radios with a simplified installation.
Features
Who uses the MXATMT2
Agriculture:
Bringexpandedperformanceto communication across the farm with Midland’s intuitive, heavy-dutyMicroMobile® Bull Bar Clamp Antenna Mount – MXATMT1.
Off-road/Overland:
Midland's Bull Bar Folding AntennaMount brings a drill-free, effortless mounting solution that makes it easy to fold the antenna out of the way.
The new MXATMT1 and MXATMT2 bull bar antenna mounts are built to ensure an easy install of Midland's Ride the Range line of antennas.
These antennas bring impressive performance, a heavy-duty design, and tough look.
MXAT03 BULLBAR ANTENNA (THE CANYON EDGE™)
This 3 db antenna will double your signal output, increasing radio range and clarity.
The MXAT03, also known as, "The Canyon Edge," is 28 inches tall and comes with a 19.5 foot COAX cable.
The bullbar antenna requires a 1/2 inch hole for mounting and is waterproof.
MXAT04VP HEAVY-DUTY BULLBAR ANTENNA WITH SPRING BASE (THE HIGHLAND™ TALL)
The MXAT04VP is the "The Highland Tall," coming in at 47.5 inches in overall height with a 6.6dB gain.
Because of this antenna's height and heavy-duty design, it's fit to take on the toughest of environments. This antenna is also water resistant so it's fit for the outdoors.
The MXAT04 requires a 1/2 inch hole for mounting.
In the box you'll find the antenna and the heavy-duty spring base with a 19.5 foot long COAX cable.
This antenna is also sold by itself as the MXAT04 without the spring base and COAX cable.
MXAT05VP 3dB HEAVY-DUTY BULLBAR ANTENNA WITH SPRING BASE (THE HIGHLAND™)
The MXAT05VP, otherwise known as "The Highland," is a 3dB gain antenna. That means it will double radio output, bringing improved range and clarity to two-way radio communication.
This bullbar antenna is 28.5-inch (over two feet) tall so it won't be an issue with obstructions on the trail.
Like other "Ridge the Range" antennas, the MXAT05 requires a 1/2 inch hole to mount.
The bundle includes the antenna and spring base with a 19.5 foot COAX cable.
This antenna is also sold by itself as the MXAT05 without the spring base and COAX cable.
