MicroMobile®
MXTA11 6db Gain Antenna

This 27.5-inch antenna quadruples the signal strength of your MicroMobile two-way radio. Stainless steel construction so it can handle the elements. NMO connector.

NOTICE: *Mount not included

$34.99

Features


120 Watt max power

Increases signal strength by up to 4x

27.5 inches in length

1.5 inche base diameter

Stainless steel

NMO connector

What's in the box


  • One 27-inch antenna

Product Support

REVIEWS


6dB Gain Antenna is rated 5.0 out of 5 by 14.
Rated 5 out of 5 by from Works flawlessly with our GMRS Attached to our Midland mag mount connected to our MTX400 and have not had any issues. Perform better than expected, the range is not an issue. Pretty sure these things could go for miles, we've been ten miles out and still had clear comms!
Date published: 2018-03-21
Rated 5 out of 5 by from Essential Upgrade This antenna really stretches the legs of the GMRS radios. It is FAR better than the tiny antenna that comes with them. I highly recommend this antenna. The magnetic mount gives it portability and flexibility, and it works very well.
Date published: 2018-08-22
Rated 5 out of 5 by from Ready to use out of the box Cheep safe way to double output power for the hard to reach areas. Good for mobile use or as a base station antenna for a RV.
Date published: 2018-04-18
Rated 5 out of 5 by from Better Range After last elk season I found I needed more range for the base radio. This antenna has been tested at our camp and works great.
Date published: 2018-07-14
Rated 5 out of 5 by from Works Great!!! I brought about this item a month ago and works great while improving the range of my mxt90 to an mile
Date published: 2018-08-10
Rated 5 out of 5 by from Midland MXTA11 Great antenna with a lot of gain. Picks up the weakest stations!
Date published: 2018-07-22
Rated 5 out of 5 by from Great antenna for GMRS Radios These antennas are the best I have found ! Great job Midland !
Date published: 2018-08-06
Rated 5 out of 5 by from Great Antenna for Price For the price, this is a great antenna that I know is going to work out of the box. After searching online and looking at all sorts of other antennas to compliment my MXT275, this one was the clear choice to know that it would just work and help me get the most use out of the radio. It shipped quickly, arrived when it said it would, and is looking great and doing great on my truck!
Date published: 2018-11-03
  • y_2018, m_12, d_8, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_14
  • loc_en_US, sid_MXTA11, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_midlandusa
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 60.29ms
  • REVIEWS, PRODUCT

QUESTIONS


Will this Antenna still support the NOAA channels on the MXT 275 ?

Asked by: Whisky Romeo
Yes, this antenna should not have much effect on WX channel reception
Answered by: Midland Support
Date published: 2018-11-27

Should I go with this antenna or the 3DB one for a MXT115 radio?  I thought I read someplace about the 6DB gain being ok yo use on the 5 watt radio I'm now using and not on either the 15 or 40 watt radios.

Asked by: dallas
Hey Dallas, We understand the confusion, there is a fair amount of misinformation out there. The answer to this question is nuanced and we would suggest you read our blogs on GMRS radios for more info. The short answer here is that you can use either the 3db or 6db gain on any of the MXT model radios. The issue that you might have read is that on certain channels a gain antenna cannot be used (1-7 & 8-14) per the FCC. We suggest the 6db gain antenna as it will quadruple your communication efficiency. Just be sure to be using channels 15-22. Hope that helps! MidlandUSA
Answered by: Midland Support
Date published: 2018-11-09

I am looking for a permanent mount for an off-road SUV. Can this antenna be mounted to the Larsen NMO-K 3/4'' Permanent Hole Mount with 17' RG58A/U Cable and UHF Male PL259 Connector?

Asked by: Sm0klnJoe
Should work just fine!
Answered by: Midland Support
Date published: 2018-09-11

Does this Antenna have to be Calabrated after it is installed

Asked by: Johnny6344
Negative, it is already tuned to be compatible with GMRS radios
Answered by: Midland Support
Date published: 2018-08-23

Does this antenna need a ground plain and/or magnetic mount, or can I mount this like a CB antenna using a fender or door mount? Thanks in advance, -Mav

Asked by: Mav11B
Hello Mav, This would mount to a mag mount - MXTA12, or can be added to mounting bracket like our MXTA6 just based on your needs! MidlandUSA
Answered by: Midland Support
Date published: 2018-11-10

I see that the specific frequency of this antenna is 462 MHz. Will this hurt my MXT400's performance on the 467 MHz repeater channels? If so, what is a better antenna for that use?

Asked by: Jake
Hey Jake, While an antenna is tuned to a nominal frequency, it will operate over a range of frequencies; so the 6db gain antenna will work just fine on all GMRS frequencies! We would recommend it for the MXT400! MidlandUSA
Answered by: Midland Support
Date published: 2018-09-07

Will this antenna work with the GXT1000VP4 two-way?

Asked by: Mark
  • y_2018, m_12, d_8, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_en_US, sid_MXTA11, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_midlandusa
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 52.94ms
  • QUESTIONS, PRODUCT